Products : Clean Room Modular Partition Ceiling Panels
Clean Room

A Room in which concentration of air born Particles are controls. With controlling Physical Properties (Temperature, Humidity & Pressure).
(Clean room panels are also called as sandwich Panels.)

Requirement Of Clean Room Panels

  1. To minimize
    • Introduction
    • Generation
    • Retention
    Of contaminated particles inside the room.

  2. Controls on physical properties required for specified products.
    • Temperature
    • Humidity
    • Pressure

  3. Controls on contamination & cross contamination.

Clean Room Contains

  • Partition wall Panels
    1. Plane panels
    2. view panel
    3. Inbuilt Riser Panel

  • Ceiling Panels

  • Clean Room Doors

  • Coving

  • Risers

  • Hepa filter housing

  • Hepa filters

  • Clean Room Equipment

1A) Partition Wall Panels-(plane)

  • MOC -
    1. P.C.G.I. ( Pre Coated Galvanize Iron)
    2. Aluminum
    3. Stainless Steel (304)
  • Construction- Factory Fabricated Double Skin Sandwich panels.
  • Insulation - Polyurethane Insulation
    Density - 40 kg/ m3
  • Installation - Male Female attachment.
  • Size -
    • 1200x2400 , 1200x3000 , 1200x4000 mm
    • Or 1200x size required by customer up to 4 mt.

1B) Partition Wall Panels-(Inbuilt Riser)

  • Moc, Construction, Insulation , Installation & Size ( Same as 1A)
  • Inbuilt Riser Duct ( 400x 80, 600x80) MOC of duct - G.I. 14 Swg.
  • M.S. Powder coated Grill.

1C) Partition Wall Panels-(View Window)

  • Moc, Construction, Insulation , Installation & Size ( Same as 1A)
  • View window of size 900 (w) x 900(H) MM Toughen Glass
  • Silica Gel for create vacuum between two glass.

2) Ceiling Panel -

  • Moc, Construction, Insulation , Installation & Size ( Same as 1A)
  • MS Suspension rod with accessories for ceiling panels.
  • Cut outs for Hepa , Tube light & Return ( if required)

3) Clean Room Doors-

  • Moc, Construction, Insulation ( Same as 1A)
  • With Accessories
    1. Door closer ( Dorma Make)
    2. Ball bearing Hinges 5
    3. Door seal
    4. Door Handle ( 10)
    5. Tower Bolt ( for Double Door)
    6. Door Frame
    7. View Window ( 700 x 500mm)
    8. Gasket
    9. Door Lock
  • Types of Door
    1. Single Door
    2. Double Door
  • SIZES-
    • 750 x 2100(h) mm
    • 900 x 2100 (h) mm
    • 1000 x 2100(h)mm
    • 1200x 2100 (h) mm
    • 1500x 2100 (h) mm

4) Coving- : Aluminum / PVC Extruded covings .

5) Grills -: M.S. Powder coated

Physical Properties

  • Sheer strength - 2.0 kg/ cm2
  • Bending strength - 2.0~5.0 kg/ cm2
  • Tensile strength - 3.0~5.0 kg/ cm2
  • Temp Range - -196 0c/ +230 0c


Download Technical Specifications

Home | Dyna Filters Company Profile | Products | Quality Credentials | Clients | Careers | Contact Us | Feedback
Copyright © 2013 Dyna Filters Pvt. Ltd., Optimised for 800 x 600 monitor resolution
Designed & Developed By HariSoft, Interactive Integrators